The Beat Root tongue drum is a relatively new percussion instrument on the market. It has quickly gained in popularity due to its unique sound and portability. This drum is made up of a wooden frame, with a rubber membrane stretched over the top. There are several metal tongues that vibrate when you hit them, creating the sound of the drum. The Beat Root Tongue Drum can be tuned by adjusting the tension of the membrane. In this blog post, we will discuss how to tune your Beat Root Tongue Drum, and what to do if it goes out of tune!
If you have a Beat Root Tongue Drum that is in need of tuning, there are a few things you can do. First, check the tension of the membrane. If the membrane is too loose, it will cause the drum to sound muffled. If the membrane is too tight, it will cause the drum to sound sharp. You can adjust the tension of the membrane by loosening or tightening the screws on either side of the frame. Once you have adjusted the tension of the membrane, you can then start to tune each individual tongue. To tune a tongue, simply loosen or tighten the screw at its base. The farther you turn the screw, the higher or lower pitch that tongue will produce. Once you have tuned all of your tongues, you should have a well-tuned Beat Root Tongue Drum!
If your Beat Root Tongue Drum goes out of tune, it is most likely due to the tension of the membrane. The membrane will stretch over time, causing the drum to sound muffled. You can fix this by simply retuning the drum as described above. If you find that your drum is going out of tune frequently, you may need to replace the membrane. You can do this by removing the old membrane and stretching a new one over the frame. Be sure to adjust the tension of the new membrane before tuning the tongues!
We hope this blog post has helped you learn how to tune your Beat Root Tongue Drum.
